School of Engineering :: The University of Jordan

Department of Chemical Engineering

Featured Research of chemical engineering Department

31.Mar.2016

Thermal cracking combined with supercritical fluid extraction of Jordanian oil shale

Chemical Engineering

01.Mar.2016

Synthesis of a Ca/Na-aluminosilicate from kaolin and limestone and its use for adsorption of CO2

Chemical Engineering

01.Jan.2014

Assessment of the status and outlook of biomass energy in Jordan

Chemical Engineering

09.Jan.2014

Solution of the Population Balance Equation using the Differential Maximum Entropy Method (DMaxEntM): An application to liquid extraction columns

Chemical Engineering

22.Mar.2013

Modeling and dynamic analysis of a rotating disc contactor (RDC) extraction column using one primary and one secondary particle method (OPOSPM)

Chemical Engineering

02.Nov.2016

Dynamic modelling of Kühni liquid extraction columns using the sectional quadrature method of moments (SQMOM)

Chemical Engineering

02.Feb.2016

CFD based extraction column design — Chances and challenges

Chemical Engineering

01.Sep.2015

CFD-population balance modeling and simulation of coupled hydrodynamics and mass transfer in liquid extraction columns

Chemical Engineering

01.Jul.2002

Thermal Conductivity of Oil Shale Particles in a Packed Bed

Chemical Engineering

01.Jan.2003

Spectroscopic and chromatographic analysis of oil from an oil shale flash pyrolysis unit

Chemical Engineering

01.Mar.2005

Batch combustion of oil shale particles in a fluidized bed reactor

Chemical Engineering

01.Jan.2014

Thermal Cracking Combined with Supercritical Fluid Extraction of Jordanian Oil Shale

Chemical Engineering

01.Mar.2016

Kinetics of Thermal Decomposition Combined with Toluene Extraction of Oil Shale

Chemical Engineering

01.Jan.2009

Microfabricated Hydrogen Sensitive Membranes

Chemical Engineering

01.Mar.2014

Study of the Separation of Simple Binary and Ternary Mixtures of Aromatic Compounds

Chemical Engineering

01.Jul.2014

Model predictive control of a binary distillation column

Chemical Engineering

01.Jun.2017

Fabrication of kaolin-based cement plug for CO2 storage wells

Chemical Engineering

01.Mar.2008

LLECMOD: A Bivariate Population Balance Simulation Tool for Pulsed Liquid-Liquid Extraction Columns

Chemical Engineering

01.Jul.2006

Fires and related incidents in Jordan (1996–2004)

Chemical Engineering

01.Nov.2006

The effect of admixed material on the minimum explosible concentration of oil shale

Chemical Engineering

01.Jan.2010

Thermodynamics of Supercritical Fluid Extraction of Some Dyes and Pharmaceutical Compounds Using the Weighting Matrix Approach

Chemical Engineering

01.Jan.2011

The Effect of Alkaline Additives on the Operating Conditions of Kaolinitic Polymerization

Chemical Engineering

02.Jan.2014

Jordanian kaolinite polymerization has been studied to determine the effect of using different alkaline materials such as NaOH, KOH, and Ca(OH)2, and sand as a filler on the compressive strength, durability under wet and dry conditions, and water absorpt

Chemical Engineering

01.Apr.2015

Determination of trihalomethanes levels in a selected area of Amman’s drinking water distribution system: case study

Chemical Engineering

02.Sep.2015

Effect of bromide and other factors on brominated trihalomethanes formation in treated water supply in Jordan

Chemical Engineering

01.Oct.2015

Chlorine disinfection of drinking water containing natural organic matter leads to the formation of brominated trihalomethanes (THMs) in the presence of bromide ions. In the present study, the results of an experimental investigation into the factors form

Chemical Engineering

01.Jan.2017

Wastes and biomass materials as sustainable-renewable energy resources for Jordan

Chemical Engineering

02.Jan.2014

Corrosion inhibition of commercial aluminum in hydrochloric acid solution by date palm leaf extracts

Chemical Engineering

01.May.2014

Fixed-bed study of ammonia removal from aqueous solutions using natural zeolite

Chemical Engineering

01.Jun.2014

Purpose – The purpose of this paper is to investigate the performance of natural Jordanian zeolite tuff to remove ammonia from aqueous solutions using a laboratory batch method and fixed-bed column apparatus. Equilibrium data were fitted to Langmuir and F

Chemical Engineering

01.Jun.2016

Specific energy consumption reduction during pulsed electrochemical oxidation of phenol using graphite electrodes

Chemical Engineering

01.May.2012

Effect of Vanadium Addition to Aluminum and Aluminum Grain Refined by Titanium on Their Chemical Corrosion Rate in Acidic Solution, HCl, at Different Temperatures

Chemical Engineering

01.Apr.2017

On the performance of Ballota Undulata biomass for the removal of cadmium (II) ions from water

Chemical Engineering

01.Feb.2017

Immobilized enzymes bioreactors utilizing a magnetic field: A review

Chemical Engineering

01.Jan.2017

Share Request full-text On the performance of Immobilized cells bioreactors utilizing a magnetic field: A review

Chemical Engineering

01.Jan.2016

Share Request full-text Impact of surface modification of green algal biomass by phosphorylation on the removal of copper (II) ions from water

Chemical Engineering

01.Jul.2015

Technical possibilities of bioethanol production from coffee pulp: A renewable feedstock

Chemical Engineering

01.Dec.2005

Control of rotational molding using adaptive fuzzy systems

Chemical Engineering

01.Oct.2000

Immobilization of antibodies on alginate-chitosan beads

Chemical Engineering

01.Mar.1999

Evaluation of parameters involved in preparation and release of drug loaded in crosslinked matrices of alginate

Chemical Engineering

01.Aug.2016

Synthesis and characterization of Cu-Zn/TiO 2 for the photocatalytic conversion of CO 2 to methane

Chemical Engineering

01.May.2016

An Experimental and Thermodynamic Study for Conversion of CO2 to CO and methane over Cu-K/Al2O3

Chemical Engineering

31.Mar.2016

Vapor–liquid phase equilibrium diagram for uranium hexafluoride (UF6) using simplified temperature dependent intermolecular potential parameters (TDIP)

Chemical Engineering

01.Jan.2016

An optimization model to improve gas emission mitigation in oil refineries

Chemical Engineering

01.Dec.2015

Numerical Analysis of the Incineration of Polychlorinated Biphenyl Wastes in Rotary Kilns

Chemical Engineering

01.Jun.2014

Continuous Genetic Algorithm as a Novel Solver for Stokes and Nonlinear Navier Stokes Problems

Chemical Engineering

01.Apr.2013

Optimum Operating Conditions for Production of Crystalline Monoammonium Phosphate Form Granulated Diammonium Phosphate

Chemical Engineering

01.Nov.2011

Nodular Structure of Isotactic Polypropylene Crystallizes from the Melt

Chemical Engineering

31.Mar.2011

Thermal and Mechanical Properties of Polyethylene Terephthalate/Polycarbonate Nanocomposites Modified by Lanthanum Acetyl Acetonate Hydrate

Chemical Engineering

01.Mar.2010

Effect of Iron Oxide Nanoparticles on the Morphological Properties of Isotactic Polypropylene

Chemical Engineering

01.Oct.2016

Study on the viscosity of jojoba oil blends with biodiesel or petroleum diesel

Chemical Engineering

01.Aug.2016

Manufacturing of zeolite based catalyst from zeolite tuff for biodiesel production from waste sunflower oil

Chemical Engineering

01.Jul.2016

Viscosity correlations for jojoba oil blends with biodiesel and petroleum diesel

Chemical Engineering

01.Feb.2016

The PCDD/PCDF emission inventory in Jordan: Aqaba city

Chemical Engineering

01.Nov.2015

Potential of Utilizing Olive Cake Oil for Biodiesel Manufacturing

Chemical Engineering

01.Oct.2016

Modeling the galvanic corrosion behavior of PdCu couple used in hydrogen purification – PEM fuel cell hybrid systems

Chemical Engineering

01.Apr.2015

[n]-Oligourea-Based Green Sorbents with Enhanced CO2 Sorption Capacity

Chemical Engineering

01.Nov.2013

Ordered mesoporous silica prepared by quiescent interfacial growth method - effects of reaction chemistry

Chemical Engineering

01.Oct.2013

Ordered mesoporous silica fibers: Effects of synthesis conditions on fiber morphology and length

Chemical Engineering

01.May.2013

Developing an Integrated Solar Powered System to Generate Hydrogen from Sea Water

Chemical Engineering

01.Apr.2015

The adsorption kinetics and modeling for heavy metals removal from wastewater by Moringa pods

Chemical Engineering

01.Feb.2015

On the performance of real grey water treatment using a submerged membrane bioreactor system

Chemical Engineering

01.Jan.2013

Desalination by solar powered membrane distillation systems

Chemical Engineering

01.Dec.2009

Effect of Surface Modifying Macromolecules Stoichiometric Ratio on Composite Hydrophobic/Hydrophilic Membranes Characteristics and Performance in Direct Contact Membrane Distillation

Chemical Engineering

01.Sep.2009

Novel porous composite hydrophobic/hydrophilic polysulfone membranes for desalination by direct contact membrane distillation

Chemical Engineering

01.Mar.2017

Solid waste composition analysis and recycling evaluation: Zaatari Syrian Refugees Camp, Jordan

Chemical Engineering

01.Mar.2017

GETTING ENERGY FROM POULTRY WASTE IN JORDAN: CLEANER PRODUCTION APPROACH

Chemical Engineering

01.Jan.2017

Managment of Plastic Bags Waste: An Assessment of Scenarios in Jordan

Chemical Engineering

01.Jul.2016

Experimental study on the effect of dust deposition on solar photovoltaic panels in desert environment

Chemical Engineering

01.Mar.2016

Environmental Ethics as a Tool for Sustainable Water Resources Management

Chemical Engineering

01.May.2013

Reaction pathways over copper and cerium oxide catalysts for direct synthesis of imines from amines under aerobic conditions

Chemical Engineering

01.Aug.2014

On the Homogeneity/Heterogeneity of Solid Copper Oxide Precatalysts in the Oxidative Homocoupling of Ethynylbenzene

Chemical Engineering

01.Jul.2020

Assessment of Fire Incidents in Jordan (2008-2014) Prof.Fawaz Sweis

Chemical Engineering

School of Engineering

Department of Chemical Engineering